Athletic Home Gym Manual De Instrucciones página 12

Assembling the Pulleys
STEP 7
and Upper cable
1. Pass the Upper cable between the Arm support and through the hole in the Tower.
2. Insert the first Pulley in the Upper frame passing the cable over it. Attach it using [1] M10x45 Screw, [2] Washers
and [1] Nut.
3. Attach [1] Pulley in the Tower using [1] M10x55 screw, [2] Pulley spacers, [2] washers and [1] nut.
Adjustment plates
Assembling the pulleys
STEP 8
and Arm cable
Pulley support
1. Attach the pulley support in the tower using [1] M10x70 screw, [2] washers and [1] nut.
2. Attach the Arm cable in Arm using [1] M10x20 screw and [1] nut, and the Pulley in Pulley support using [1] M10x45
screw, [2] washers and [1] nut. Repeat the procedure on the other side of the equipment passing the cable behind the
Tower.
3. Attach [1] Pulley above the Arm cable in the Cross support using [1] M10x45 Screw, [2] Washers and [1] Nut.
4. Attach [1] Pulley in the Upper Frame using
[1] M10x45 Screw, [2] Washers and [1] Nut.
5. Attach the upper cable on weight selector
tube.
6. Attach [1] Pulley between the [2]
Adjustment plates using [1] M10x45 Screw, [2]
Washers and [1] Nut, then place this set
between the Upper Pulleys as on the image.
12
Cross support