Accessories Delivered With The Multimeter; Function Description; General Functions; Measurement Functions - KPS MT50 Manual De Funcionamiento

Input for Temperature, hFE and 0.1µA to 400mA current
TEMP μA
measurements. (Receiving the red test lead or the "+" plug of
mA hFE
the special multi-function socket).
Input for 400mA to 10A current measurements. (Receiving the
10A
red test lead)
2.5 Accessories
Delivered with the multimeter:
• User's manual
• Test leads
• Carry case
• "K" type bead Thermocouple
• Special Multi-function socket

3. FUNCTION DESCRIPTION

3.1 General Functions

3.1.1 DATA HOLD mode
Data Hold mode makes the meter stop updating the display. Data Hold function
can be cancelled by changing the measurement mode, or push HOLD key
again.
To enter and exit the Data Hold mode:
1. Press HOLD key. Fixes the display on the current value,
2 A second short press returns the meter to normal model.
3.1.2 Battery Saver
Turn on the meter. And then The Meter will be turned off automatic after approx.
15 minutes. the buzzer will sound five times before the Meter turn off.
3.1.3 Non Contact AC Voltage detection
Set rotary switch to the
is vertically and horizontally centered and contacting the conductor ,when the
live voltage > 110V(RMS),the sensing indicator will be on and the buzzer will
keep sounding as warning.

3.2 Measurement Functions

3.2.1 AC and DC Voltage measurement
KPS-MT50 • Digital multimeter
One piece
One piece
One piece
One piece
One piece
position and hold the Meter so that the Meter's top
32
is displayed.