Publicidad
POWR
MAGNET BASE AND CONTROL LEVER
INSTALLING THE MAGNET CONTROL
LEVER
1. Check:
•
Magnet control lever
Cracks/damage → Replace.
2. Install:
•
Magnet control lever
Installing steps
(1) Assemble spring
2
lever
.
(2) When assembled, put the spring claw
into the groove
3
cam
.
(3) Assemble as shown in the illustration.
(4) Install collar and washer.
NOTE:
• Assemble the parts according to the
steps above, and then install the
assembled parts to the cylinder body.
• Apply Yamaha grease A (water resis-
tant grease) to the spring, magnet con-
trol lever and acceleration cam.
5-18
E
1
to magnet control
a
on the acceleration
Publicidad
Capítulos
