Changing The Water Filter - melitta Passione Manual De Instrucciones

Requirement: The appliance is ready for operation. The new water filter is
at hand.
1. Press the "Service" button and also the "Two cups" button for longer
than 2 seconds.
» The appliance indicates that:
ū the filter programme is running
ū the drip tray and the coffee grounds container must be emptied.
2. Empty the drip tray and the coffee grounds container.
3. Insert the drip tray without the coffee grounds container.
» The appliance indicates that the water tank needs to be filled.
4. Place the coffee grounds container beneath the Cappuccinatore.
5. Open the lid of the water tank and pull the water tank upwards out of
the appliance by the handle.
6. Empty the water tank.
7. Insert a new filter in the water tank (see Fig. 18).
8. Fill the water tank.
9. Insert the water tank again.
» The lighted display indicates that the rotary regulator must be actu-
ated.
10. Turn the rotary regulator clockwise until it stops.
» The filter is rinsed with water.
» Water flows into the vessel beneath the Cappuccinatore.
Information
If the appliance indicates that the water tank must be filled during this pro-
cess, first turn the rotary regulator anticlockwise to the stop. Fill the water
tank. As soon as you have inserted the filled water tank, turn the rotary
regulator clockwise back until it stops.
11. If water no longer flows into the vessel and the appliance does not
indicate that the water tank must be filled, turn the rotary regulator
anti-clockwise until it stops.
12. Insert the coffee grounds container in the drip tray again.
» The new filter is inserted and the appliance is ready for operation.

Changing the water filter

Insert a new water filter (see section Inserting the water filter on page 92).
Care and maintenance
93