Diagram Of Parts; Brewing Coffee - Mr Coffee BVMC-MLXX Serie Manual Del Usuario

DIAGRAM OF PARTS

WATER
RESERVOIR
PERMANENT
FILTER BREWING
BASKET
POWER ON
SWITCH
PLATFORM
PERMANENT
FILTER BASKET
FILTER
4
BVMC-MLXX_15ESM2.indd 5-6
TOP COVER
ADDED CONVENIENCE
Attach the
mug lid
onto the
handle of
the brew
MUG LID
DRINKING
MUG (OUTER
PLASTIC LAYER)
DRINKING
MUG (INNER
STAINLESS
STEEL LAYER)
BOTTOM RIM
IMPORTANT: Clean Your Mr. Coffee
Brewer Before Use!
Wash stainless steel mug, mug lid and permanent
brewing basket in water with mild detergent.
Rinse them with water thoroughly. Follow steps below
(using water only) to clean the inside of your coffee
brewer.

BREWING COFFEE

1. Open the top cover.
2. Fill the water reservoir with fresh tap water up to
the MAX (500mL) indication. Do not overfill.
3. Place mug on the platform.
Mr. Coffee coffee mug has a maximum capacity of 500mL.
CAUTION: To avoid risk of scalding or other injury, do
not brew coffee using other container.
4. Fill permanent filter with coffee ground. The
permanent filter can contain approximately 25g of
coffee ground. The amount of coffee ground may
vary depending on the fineness of coffee ground.
5. The brew basket can also support 4 cup paper
filters if desired.
6. Close top cover.
7. Press the Power ON switch "I" to switch on the
appliance. The Power switch will illuminate to
indicate that brewing process has started. Let
the coffee passes through the filter into the mug.
the coffee maker will automatically shut off when
brewing is completed. During brewing cycle, you
can always unplug to stop brewing.
NOTE: The Mr. Coffee Personal Coffee Brewer can
®
also be used to heat up water for instant food and
Personal Coffee
®
5
8/12/15 09:15