•
Remove and fi ll the tank with fresh, still water (Fig.3).
•
Turn the machine on by setting the main switch to "I".
•
The display shows the various machine phases. Wait until it is ready to use.
NB: If the machine has a connection to the water supply, open the tap located upstream before starting the
machine; this will automatically fi ll the tank when it is started.
The machine has a display which provides the user with all the information necessary for its operation.
The display is divided into sections in order to better communicate with the user. Messages are shown by categories to
facilitate their understanding. Messages can be combined and diff erent for each group, because the machine allows all
functions to be managed in an independent way.
Left group in heating up phase.
Hot water dispensing in heating up
Hot water dispensing ready.
English
Turning the appliance on
General operating indications
HEATING UP
Heating Up
Heating Up
phase.
THE MACHINE IS READY TO USE
SELECT
Left group ready.
Right group in heating up phase.
Steam dispensing in heating up phase.
Right group ready.
SELECT
Steam dispensing ready.
29 29