Radiocontrol; Radiocontrol Menu; Menu Description; Remote Control Menu - Lincar Mya 505 Manual Del Usuario

RADIOCONTROL

By mean of the radiocontrol you can effect all working operations of the appliance. In case of
loss or breakdown of the radiocontrol, the appliance can be utilized, with some limitations,
with the emergency controlboard, which is place on the lh back side of the appliance itself. If
the radiocontrol is not available, the appliance continues working with the previously setted
values (room temp.), while the room temperature is realised by the room feeler, which is
placed on the appliance. The emergency controlboard allows to switch ON and OFF the
appliance and to set exclusively only 2 levels of power:
LOW power, push button 1, light switched on, next to button 1
HIGH power, push button 2, light switched on, next to button 2

RADIOCONTROL MENU

-Push on button 7 to have access to the menu
-Use buttons 4 and 5 to run on the different menu
-Push again on button 7 to enter into the displied menu
-Use buttons 4 and 5 to run on the different submenu, the button 1 and 2 to modify the value
shown on the display
-The button 7 (menu) accedes to the displayed menu/submenu
-The button 3 returns always to the previous menu

MENU DESCRIPTION

Menu 01 FAN REGULATION
•
Menu 02 SET WATCH (Setting the clock inside the equipment).
•
Menu 03 SET CHRONO (Set the schedules for automatic on / off).
•
Menu 04 SELECT LANGUAGE (Set the language on the control panel).
•
Menu 05 SELECT FEELER (selecting room feeler).
•
Menu 06 STAND-BY (On/Off Stand-By)
•
Menu 07 SOUND (Setting the beep sound).
•
• Menu 08 LOAD INITIAL (Pellet loading in continuously).
• Menu 09 STATUS STOVE (Displays the status of the appliance).
Menu 10 PELLETS CORRECT (Correction of carburetion of the appliance).
•
Menu 11 TECHNICAL CALIBRATIONS (Only for TECHNICAL STAFF).
•
This equipment is equipped with two fans who convoy hot air into the rooms :
• VENT-1 (automatically regulated and cannot be excluded )-LH Front view.
• VENT-2 manual or automatic adjustment, can be escluded with rear contact. RH
Front view RH .
MENU 01 (fan regulation)
This menu allows to set
canalization system. Use button 1 to modify the settings.
3 different settings are possible, which will be displayed on the on the radiocontrol panel:
A – The fan will adapt itself automatically to functioning power of the appliance.
0 – The fan will remain always off.
1---5 – The fan will function always at the selected speed (from 1 to 5).
On display appears also the indication of VENT-3 : this is not to take into consideration
because it's not present and it's not available for this model.
the function modality of the fan VENT-2 connected to the
54/128
IT-GB-FR-ES mod. 505