Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LS13.0E ASSEMBLY STEP 9
LS13.0E ONLY
LS13.0E
HANDLEBAR
WIRES
NOTE: Be careful not to pinch
any wires while attaching the
handlebars or covers.
18
LS8-LS10-LS13E-OM_Rev1.3.indd 18-19
HARDWARE BAG 9 CONTENTS :
BOLT (CC)
15 mm
Qty: 4
AERO HAND GRIPS
* This step is for LS13.0E only.
BOLTS (CC)
Open hardware bag 9.
A
Connect the handlebar wires from the
B
UPPER HANDLEBAR
right aero hand grip to the wires from the
upper handlebar. Attach aero hand
SCREWS (DD)
grip to the upper handlebar using 2
bolts (cc).
HANDLEBAR COVERS
NOTE: Be careful not to pinch any wires.
Repeat on other side.
C
D
Snap right handlebar covers over
handlebars and attach using 4 screws (dd).
E
Repeat on other side.
LS13.0E ASSEMBLY COMPLETE!
ELLIPTICAL OPERATION
SCREW (DD)
This section explains how to use your elliptical's console and programming.
15 mm
Qty: 8
The BASIC OPERATION section in the ELLIPTICAL gUIDE has instructions for the following:
• LOCATION OF THE ELLIPTICAL
• POWER/GROUNDING INSTRUCTIONS
• FOOT POSITIONING
• MOVING THE ELLIPTICAL
• LEVELING THE ELLIPTICAL
• P OWER/MANUAL INCLINE OPERATION
• USING THE HEART RATE FUNCTION
19
7/22/10 1:48 PM
Publicidad
Tabla de contenido
