Alarms And Indicators - GETINGE GROUP ARJOHUNTLEIGH Alpha Active 4 Instrucciones De Uso

Alarms and Indicators

Low Pressure Indicator
See "Troubleshooting" on page 16 for possible causes of Low Pressure.
Service Indicator/Pump Fault
Power Fail Indicator
Weight settings are affected due to power fail. There are two variants of
pump in the market as follows:
1. The pump will revert to a default patient weight setting of 125 kg once
power is restored after a power outage or generator test.
2. The pump will revert to the last setting set by the caregiver once power is
restored after a power outage or generator test.
To determine which pump is being used once the pump is operating, set the
pump to 20 kg and disconnect from the power supply. Reconnect power and
if the pump reverts to 125 kg, you have pump 1, and if it reverts to 20 kg, you
have pump 2.
Low Pressure
The
pump detects low pressure within the mattress
replacement. An audible alarm will sound unless
mute
cancelled by the
The indicator will extinguish once normal pressure is
reached.
Service/pump fault
The
remain on if the pump has detected an internal fault. A
Service Engineer should be called.
Power Fail
The indicator will illuminate when a mains
power failure has been detected. An audible alarm will
sound until power is resumed or the pump is switched
off using the on/off button.
8
indicator is illuminated whenever the
button.
indicator will illuminate and