Replacing The Filter Bag - Makita VC4710 Instrucciones De Uso

Makita VC4710

6.2.4 Replacing the filter bag

20
A A
C
B
A
A
1. Be sure that the vacuum is
switched off and unplugged.
2. Open the retaining clamps
(A) and remove the upper
section of the vacuum clean-
er.
Removing the filter bag:
3. Carefully remove the filter
bag connection from the inlet
fitting (B).
4. Close the filter bag connec-
tion (C) with the slider.
5. Dispose of the filter bag in
accordance with applicable
regulations.
Inserting the filter bag:
6. Clean the tank.
7. Insert the filter bag in the
tank.
8. Press the cardboard collar
of the new filter bag firmly
on to the inlet fitting (B).
9. Attach the upper section of
the vacuum.
10. Close the retaining clamps
(A). Ensure that the retaining
clamps fit properly.
Original Instruction