Operating; Process Controls; Control Panel - SEAL 62Pro Manual De Uso

5 OPERATING

This chapter describes the function of the controls and indicators, the operating modes,
how to set up and operate the machine and a number of applications.
5.1

Process controls

This section gives an overview of the functions of the controls on the control panel
(Figure 9: Control panel), the heater control (Figure 10: Heater-control section) and
elsewhere on the machine (Figure 12: Additional controls).
Note:
Switch on the heaters approximately 1 hour before use, if a process requires the rollers
to be heated. Close the nip and let the machine run at low speed, to avoid uneven hot
spots.
5.1.1

Control panel

This paragraph describes the controls and indicators on the control panel.
When LED's are blinking, this indicates an error.
Figure 9: Control panel
Operating 21