Normal Rec Mode Set Setting - Sanyo DSR-3000 Manual De Instrucciones

NORMAL REC MODE SET SETTING

Main menu 1
<MAIN MENU 1>
1.LANGUAGE/CLOCK SET ->
2.VIDEO INPUT SET ->
3.RECORDING AREA SET ->
4.RECORDING CONDITIONS SET ->
5.NORMAL REC MODE SET ->
6.TIMER SET ->
7.HOLIDAY SET ->
8.ALARM REC MODE SET ->
TO MAIN MENU 2 ->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE
NORMAL REC MODE SET setting
This lets you set the recording quality, recording method (frame or
field), audio recording and recording speed for the normal recording
area.
1
Press the MENU button to select NORMAL REC MODE SET,
and then turn the shuttle dial clockwise.
The NORMAL REC MODE SET sub-menu appears, and the
cursor moves to PICTURE QUALITY.
MENU
2
Turn the shuttle dial clockwise.
"ENHANCED" flashes.
Display examples: Picture quality selection
•
BASIC (BA): (15 KB)
•
NORMAL (NO): (22 KB)
•
ENHANCED (EN): (30 KB)
•
FINE (FI): (42 KB)
•
SUPER FINE (SF): (56 KB)
3
Use the jog dial to change select the image quality (example:
" SUPER FINE" ), and then turn the shuttle dial clockwise.
The cursor moves to FRAME/FIELD RECORDING.
4
Turn the shuttle dial clockwise, use the jog dial to set frame
or field recording (example: FRAME), and then turn the
shuttle dial clockwise.
The cursor moves to AUDIO RECORDING.
English
Sub-menus
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING : OFF
REC CYCLE : 0.10 SEC ( 54H)
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING : OFF
REC CYCLE : 0.10 SEC ( 54H)
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING : OFF
REC CYCLE : 0.10 SEC ( 54H)
<NORMAL REC MODE SET>
PICTURE QUALITY : SUPER FINE
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING : OFF
REC CYCLE : 0.20 SEC ( 108H)
<NORMAL REC MODE SET>
PICTURE QUALITY : SUPER FINE
FRAME/FIELD RECORDING : FRAME
AUDIO RECORDING : OFF
REC CYCLE : 0.20 SEC ( 108H)
Sets the image quality.
Sets the recording method
(frame or field).
Sets audio recording.
Sets the recording rate (recording speed).
Numbers in brackets indicate the possible
recording times.
5
Turn the shuttle dial clockwise, use the jog dial to set audio
recording (example: " ON" ), and then turn the shuttle dial.
The cursor moves to REC CYCLE.
Note:
•
Audio recording can be set when the REC CYCLE setting is from
0.02 to 0.10 (FIELD) or 0.03 to 0.20 (FRAME).
•
When set to "ON", the letter "A" (audio recording indicator) appears
in front of the REC CYCLE recording rate. This is because the
audio recordings are also made in the normal recording area, so
that the image recording capacity of the normal recording area is
reduced.
6
Turn the shuttle dial clockwise, use the jog dial to set the
recording speed (example: " 0.13" ), and then turn the shuttle
dial.
The cursor moves to PICTURE QUALITY.
Note: The field and frame recording speeds vary depending on the
PICTURE QUALITY setting. Refer to the Recording speed table
for details. (See page 11.)
7
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
49
<NORMAL REC MODE SET>
PICTURE QUALITY : SUPER FINE
FRAME/FIELD RECORDING : FRAME
AUDIO RECORDING : ON
REC CYCLE : A0.20 SEC ( 108H)
<NORMAL REC MODE SET>
PICTURE QUALITY : SUPER FINE
FRAME/FIELD RECORDING : FRAME
AUDIO RECORDING : ON
REC CYCLE : A0.13 SEC ( 72H)