Buzzer Set Setting - Sanyo DSR-3000 Manual De Instrucciones

BUZZER SET SETTING

Main menu 2
<MAIN MENU 2>
1.DISPLAY/VIDEO LOSS SET ->
2.RS-232C/RS-485 SET ->
3.BUZZER SET ->
4.SECURITY LOCK SET ->
5.NETWORK SET ->
6.HDD SET ->
7.POWER FAILURE/USED TIME ->
TO MAIN MENU 1 ->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE
Sets the buzzer to sound when not
recording.
The buzzer can be made to sound as a warning during an alarm and
when the hard disk becomes full.
1
Press the MENU button twice and display the MAIN MENU 2
screen.
The cursor moves to DISPLAY/VIDEO LOSS SET.
MENU
2
Use the jog dial to move the cursor to the BUZZER SET
setting, and then turn the shuttle dial clockwise.
The BUZZER SET sub-menu appears, and the cursor moves to
ALARM.
Sub-menus
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
62
Sets the buzzer to sound during alarms.
Sets the buzzer to sound when there is
no recording space left.
Sets the buzzer to sound when there is a
problem with the hard disk.
Sets the buzzer to sound when the
security lock is engaged.
Sets the buzzer to sound when an
operating button is pressed.
3
Turn the shuttle dial clockwise.
"OFF" flashes. Use the jog dial to change the setting to "ON" or
"OFF".
ON: The buzzer will sound when an alarm is triggered.
4
If necessary, follow the same procedure to change the
buzzer setting (ON/OFF).
•
DISK FULL (ON):
Sets whether the buzzer sounds when disk overwriting
is off and the hard disk is nearly full.
•
DISK ERROR (ON):
Sets whether the buzzer sounds when there is a hard
disk error.
•
LOCK WARNING (ON):
When the security lock is engaged and a locked button
is pressed, the buzzer sounds.
Note: When an item is set to "ON", the buzzer sounds twice at an
interval of about 0.5 seconds.
•
KEY IN (ON):
Sets the buzzer to sound each time an operating button
is pressed.
•
NON REC (ON):
Sets the buzzer to sound when recording stops by itself
and when another person deliberately stops recording.
5
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
English