Accessing The Connection Compartment - tbs electronics Omnicharge2 OC2 12-40 Manual Del Propietário

2
The Omnicharge 12-40 and 24-20 have the same size. The same applies to the Omnicharge
12-60 and 24-30.
Further mounting details:
1. Choose an appropriate mounting location
2. For installing in a dry and clean location, the unit can be mounted in any direction
although mounting the charger vertically provides the best thermal performance
3. For installing in boat or marine environment, the unit can be mounted horizontally and
vertically (AC and DC panel facing downwards only to provide adequate drip protection).
4. Use the base of the charger as a mounting template to mark the positions of the fxing
screws.
Keep a clear space of at least 10 cm around this product for cooling purposes! Always
mount this product in an upright position. Floormounting is allowed as well, provided that
all 4 screws are used to secure the enclosure.
2.3

Accessing the connection compartment

!
CAUTION
To access the connection compartment, remove
the three screws indicated on the left and slide
the connection compartment cover upwards.
Never operate this product without having the
cover re-installed!
8
2