44
ENGINE OPERATION
R
3
OFF
ON
START
PUSH TO IDLE CHANGE
1. Throttle grip
2. Shift lever
3. Main switch key
1. Turn the throttle grip to the slow posi-
tion.
7
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Turn the main switch key to the OFF
position.
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
N
2
F
ENOF00880-0
N
1
2. Turn the main switch key to the OFF
position.
OFF
1. Control lever
2. Mine switch key
ENOW00869-0
WARNING
After stopping the engine:
Close the air vent screw on the fuel tank
cap.
Disconnect the fuel connector of the
engine and the fuel tank.
Disconnect the battery cord, after each
use.
Emergency engine stopping
Press the emergency stop switch or
remove stop switch lock to stop the
engine.
2
ENOF00881-0
ON
START
2
ENOF00882-0