Mode Switch; Using The Camera - MINOX DTC 550 WiFi Manual De Instrucciones

OPERATION

Mode switch

Mode
OFF (Off mode)
SETUP (Test mode)
ON (Live mode)
Control buttons

Push the switch to SETUP to activate the display. A melody will sound and the red LED in the LED window will light up
briefly when motion is detected in front of the sensor.

Various functions can be activated and settings made using the control buttons.
The following control buttons are available for this purpose:
Control button
MENU
REPLAY
/
/
OK
To turn the camera completely off again, push the mode switch to OFF. A melody will sound.
The battery symbol in the display indicates the available battery power.
Setting your preferences (Test mode)
In the test mode, not only can you set your preferences, but you can also take photos and videos with your wildlife camera
and subsequently view them on the camera's display.

Push the mode switch to SETUP to enter the test mode. A melody will sound.

Press the MENU button to enter the settings menu.
The wildlife camera is completely turned off.
You can make settings on your camera, as well as take and view
photos/videos while in the test mode (see "Setting your preferences").
The wildlife camera will be activated and can take pictures on its own
(Live mode).
Settings menu
Playback mode
• Manual recording mode for videos.
• In SETUP, activate the video mode.
• Start and stop video recording.
• Manual capture mode for photos.
• in SETUP, activate the photo mode.
• Take a photo.
Turn the camera off if the energy saving mode has been activated.
Function
Function
33