Stop Mode; Restarting; Controller; Reflex Control Smart - Reflex Servitec S Manual De Instrucciones

Controller

Continuous degassing
This mode is started during first commissioning by pressing the Auto button. Multiple degassing cycles without pause times are
carried out over a fixed period of several hours during the day. The daily start time is set based on the time of the initial
commissioning.
Interval degassing
This mode comprises repeating intervals. There is an idling time between the intervals. Once continuous degassing has completed,
interval degassing starts automatically.
8.1.2

Stop mode

On the controller, press 'Stop' to activate stop mode. The Auto LED of the operating panel goes out, the Stop LED lights up.
Except for the display of information, the device is non-functional in Stop mode. Function monitoring is stopped. The vacuum
pump is switched off.
 Note!
The system returns an alarm if the Stop mode is activated for more than 4 hours.
8.1.3

Restarting

 Note!
Recommissioning after a long shut-down takes place by pressing the 'Auto' button.
9 Controller
9.1

Reflex Control Smart

Access to the Servitec S is possible using the Reflex Control Smart app via a Bluetooth-connected smartphone or tablet. The app is
available from the app store (Android or iOS), or via the QR code given below.
The Reflex Control Smart app provides the following functions amongst others:
• Intuitive and self-explanatory menu and operating
guidance
• Easy and quick commissioning (commissioning-wizard)
• Querying of the system pressure
• Setting of operating mode Levelcontrol, Magcontrol
and make-up degassing
22 — English
•
•
•
Vacuum spray degassing — 20.05.2019
Individual configuration of the degassing mode
(operating times for continuous and interval
degassing, number of cycles, day of the week and
time)
Maintenance and troubleshooting wizard
Software updates for system control