emmeti XECO-XX15W Serie Manual Instalación E Instrucciones Para El Uso De La Unidad Interna página 65

8. AIR CONDITIONER USE
8.4 Heating functioning
 Press the MODE key to select the
- +
 Use the keys to set the desired room temperature (16÷30 °C).
The temperature can be set degree by degree.
3 Press the FAN key to set the desired fan speed:
AUTO
Auto* Low
* The fan speed varies according to the preset temperature.
3 By pushing the button please select the desired flaps position.
Note
OFF
Air conditioner modulate the compressor frequency automatically to
maintain the set temperature.
8.4.1 Anti-cool air protection
Internal fan functioning depends on the internal unit exchanger tempe-
rature:
- Internal unit fan starts working just few minutes after the external
unit start-up, when exchanger is warm.
- Internal unit fan keeps on functioning for few minutes after the
external unit stops, until the exchanger becomes cold.
8.4.2 Automatic defrosting controlled by the microprocessor
- When air conditioner is used in Heating mode and the temperature
outside is low and humidity is high, dew accumulates on the external
unit which reduces air conditioner performances.
- To prevent this performances reduction, air conditioner is equipped with
an automatic defrosting system set by the microprocessor. When dew is
accumulated air conditioner temporary stops and defrost quickly (dura-
tion between 8 and 10 minutes).
During defrosting, temperature display shows H1 code
Attention:
During defrosting, internal and external unit fans stop and some vapour
of the external unit can get out. This is due to the defrosting and not to a
bad functioning
operating mode.
Medium High
GB GB
AUTO
65