Introduction To Modular Series; Permitted Uses - AUtec Modular Serie Manual De Usuario

LIMKNPU2

INTRODUCTION TO MODULAR SERIES

Industrial radio remote controls of the Modular series
are used to command machines from a distance. Each
industrial radio remote control is made up of a portable
transmitting unit, from which the user can remotely
control the machine, and a receiving unit installed on
board the machine itself.
The transmitting unit uses radio frequencies to
transmit a coded message which contains a value
called address. Each receiving unit can only decode
the messages coming from a transmitting unit with the
same address.
This excludes the possibility of an interference
activating any system function. If the radio frequency
transmission is disturbed, incorrect or interrupted, the
receiving unit autonomously stops the whole system.
Each Modular series radio remote control is in conformity
with the R&TTE 99/05/CE Directive and all its essential requisites.
Each radio remote control is also in conformity with the norms
given in the EC conformity declaration supplied with this manual.
!
Autec cannot be held responsible if the radio remote control is
installed on applications that are different from those permitted
Material lifting machines (construction cranes, industrial bridge cranes,
machines for moving material in general, . . . )
Machines installed in areas where equipment with explosion-proof
characteristics are being used.
Machines for moving, raising and transporting people.
2

PERMITTED USES

FORBIDDEN USES
Transmitting
unit
:
.
Receiving
unit
Page 2