Mk10, Mk12 Operation Transmitting Unit - AUtec Modular Serie Manual De Usuario

LIMKNPU2

MK10, MK12 OPERATION TRANSMITTING UNIT

POWER AND STARTING
1 To switch on the transmitting unit, insert
the starting key and turn it to "I".
2 To start the radio remote control functions,
press the "START" button for 1÷2
seconds.
After starting, the green signalling LED
always lights up.
1
TYPE
blinking green LED
blinking red LED, accompanied
by intermittent sounds from the
buzzer
steady red LED at starting,
accompanied by the continuous
sound from the buzzer
6
2
SIGNALS
MEANING
OPERATION
NORMAL
LOW BATTERY
The transmitting unit
switches off 3,5 minutes after
the LED starts flashing
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON INSERTED
COMMAND
ACTIVATION
Operate the pushbuttons
a n d / o r t h e s e l e c t o r s
actuators relevant to
whatever movement or
selection command is to
be carried out.
ACTION
///
Switch off the
transmitting unit and
replace the battery
Release actuator(s)
and/or the STOP
pushbutton
Page 10