Extel WEVP 256 Instrucciones De Uso página 48

INTRODUCTION
The videophone consists of an indoor reply station with colour screen and a street unit with intercom
and video camera enabling occupants to see and communicate with visitors who have rung. Easy to install
as 2 wires ensure all functions: chime, video image, intercom, lock commands and automatic control.
Please read this instruction manual carefully to ensure you make the best use of the videophone.
2. KEY
a. Screen
1 4
2 3
1. Microphone to communicate with the roadside panel and the additional monitor.
2.
Communication with the road side panel after a call.
3.
Monitoring or image resume key.
4. INTERCOM key with the optional additional monitor WEVPMS 253 BIS.
5.
10,1" colour screen (26 cm).
6. Control of a strike or electrical lock (12 VDC output at the rear of the camera).
7. Control of outdoor lighting system via a 12 VAC switch (12 VDC output at the rear of the monitor).
8. Control of an automatic gate opener. (contact without current at the back of the camera).
9.
Indicator of silent ring tone and indoor melody. (switching off ring tone and indoor melody)
10.
Indicator of a call from the roadside panel DOOR PHONE (green) or INTERCOM (blue) (operates
with the optional additional monitor WEVPMS 253 BIS).
11.
Colour adjustment.
12.
Brightness adjustment.
13.
Ring tone volume adjustment.
14.
Selection of the ring tone (1. Ding Dong, 2. S.A.C) or 0. Silent (switching off ring tone and indoor melody)
15. Terminal blocks for the modular adapter to connect to an installation compliant with the standards
in force. NFC 15-100 in France). Carefully observe polarity.
16. Terminal blocks for the camera, the monitor and the remote control switch
17. Not used (do not connect anything)
5 6 7 8 9 10
Back of the motor
0
1
2
11 1213 14
16
15
3EN
15 Volts DC
+
INPUT
15 Volts DC
17