Extel WEVP 256 Instrucciones De Uso página 50

Do not point the video camera directly at the sun or at reflecting surfaces.
Tip:
b. Installing the reply station (monitor)
1. Fasten the wall mounting
the monitor screen is at a height of
approximately 1.60 metres.
2. Connect the wires from the street unit
and lighting system (if installed).
3. Connect the adapter to the back of
the monitor (without connecting it to
3
power grid). Observe polarity
4. Position the monitor
mounting .
2
4. INSTALLING THE ADAPTER
15 VDC
so that
2
on the wall
1
1
230 VAC
2
1
2
3
1. Green light indicator, turn on
2. Fixing holes
CAUTION
Carefully observe polarity.
The transformer must be mounted to a DIN rail in a
modular fusebox or surface-mounted on a non-metal
surface using the two mounting holes.
The terminal block covers must be fitted. The unit
should be connected to an electrical installation
meeting applicable standards (NFC 15-100 for
France) AFTER WIRING IS COMPLETELY
FINISHED.
5EN
2
1,60m