Steren AMP-013 Manual De Instrucciones página 21

5. Tone: High: in this position, the tone increase and you will hear more treble tones. Low: in
this position, the tone decrease and you will hear more bass tones.
6. Holder.
7. BAT LOW: this LED turns on when the battery is discharged.
8. Power: turn on LED indicator.
9. RECHARGE: Once you have put the 9V batteries into the compartment, the LED will
illuminate. The 12V LED turns on when the back-up battery is charging.
10. RF1 (MIC 1): Wireless mic 1 RF LED.
11. AF1 (MIC 1): Wireless mic 1 AF LED.
12. RF2 (MIC 2): Wireless mic 2 RF LED.
13. AF2 (MIC 2): Wireless mic 1 AF LED.
14. AC power input plug.
15. 14V battery charging compartment.
16. 9V battery charging compartment.
17. Speaker.
18 DC power input plug.
19. MIC INPUT: input for wire microphone.
20. AUX INPUT.
21. ON/OFF/Charge Switch:
- : Turn the device on.
O : Turn the device off.
=: In this position the battery is charging, if the amplifier is connected to an electrical
contact.
6
2. CONTROLS