Sony DAV-IS10 Manual De Instrucciones página 31

1
Turn on your TV.
2
Switch the input selector on the TV to this system.
3
Press "/1.
The system turns on.
Unless the mode of the system is set to "DVD," press FUNCTION on the remote or FUNCTION
(soft-touch button) on the control unit to select "DVD."
"No Disc" appears in the front panel display and the system is ready for loading the disc.
4
Load a disc.
Push the disc into the disc slot until the disc is pulled in automatically.
The disc is drawn into the control unit automatically and the following indication appears in the
front panel display.
5
Press H on the remote, or touch N (soft-touch button) on the control unit.
The system starts playback (continuous play).
Adjust the VOLUME +/– on the remote or touch the VOLUME +/– (soft-touch button) on the
control unit.
Tip
• You can change the speed at which the volume is turned up and down.
To turn the volume up/down quickly:
– Press and hold the VOLUME +/– on the remote.
– Touch the VOLUME +/– (soft-touch button) on the control unit, when "VOLUME XX" (X is a number) appears,
touch and hold the VOLUME +/–.
To set the volume up/down precisely:
– Press the VOLUME +/– briefly on the remote.
– Touch briefly VOLUME +/– (soft-touch button) on the control unit.
• When you connect the system and TV with the HDMI cable, you can operate them simply using the HDMI
CONTROL function. For details, see page 39.
Note
• When you set the HDMI CONTROL function to on, the TV that is connected to the control unit with the HDMI
cable can be synch-operated with the system. For details, see page 39.
Labeled side facing to upper surface
continued
31
GB