Sony DAV-IS10 Manual De Instrucciones página 46

6
Press X/x to select [STB SYNCHRO], then press
7
Press X/x to select [ON].
The default setting is underlined.
• [ON]: sets the [STB SYNCHRO] function to on.
• [OFF]: sets the [STB SYNCHRO] function to off.
8
Press .
[DIGITAL IN] setting is selected automatically.
CUSTOM SETUP
HDMI CONTROL:
STB SYNCHRO:
TV OPT, SAT/CABLE COAX
DIGITAL IN:
TV OPT, SAT/CABLE COAX
PAUSE MODE:
TV COAX, SAT/CABLE OPT
TRACK SELECTION:
MULTI-DISC RESUME:
AUDIO DRC:
AUDIO (HDMI):
DivX:
9
Press X/x to select a setting depending on the coaxial or optical cord (C).
The default setting is underlined.
• [TV t OPT, SAT/CABLE t COAX]: Optical audio input signals are assigned to "TV"
function, coaxial audio input signals are assigned to "SAT/CABLE" function.
• [TV t COAX, SAT/CABLE t OPT]: Coaxial audio input signals are assigned to "TV"
function, optical audio input signals are assigned to "SAT/CABLE" function.
10
Press .
The setting is made.
Tip
• You can operate this function on STB or a digital satellite receiver which is not compatible with HDMI CONTROL
function.
Note
• Depending on the TV, this function may not work when STB or a digital satellite receiver is connected to the HDMI
1 jack of the TV.
Enjoying digital sound
Select the HDMI input of your TV connected to the STB or digital satellite receiver (HDMI 1
shown above).
The system accepts the signal from the SAT/CABLE (DIGITAL IN COAXIAL or OPTICAL) jack
automatically and outputs the sound of the STB or digital satellite receiver from the speakers of the
system.
46
GB
ON
ON
ON
OFF
OFF
Registration Code
.