Comunello SHOWIN RM MS45RM20H0B00 Manual De Instrucciones página 15

1. Assemblage instructions
1.1 Preliminary suggestions
The installation must be done by a technician following the safety norms in force. Please read carefully and
save a copy of this Manual for future reference. Only apply to authorized personnel to replace the feeding
cable of the motor. Do not pierce nor insert screws in the whole length of the motor. Avoid any contact of the
motor with liquids. Avoid to crush or knock over the motor. Possible tampering or wrong connections are not
covered by guarantee. Be sure that all parts are properly fixed to assure the correct mechanical functioning
of the motor. Load must be connected with the motor power supply.
ATTENTION:
v. If a manual release is provided, the actuating member is to be installed at a height less than 1,8m.
vi. Before installing the drive, remove any unnecessary cords and disable any equipment not needed for
powered operation.
vii. For installation for awnings, a horizontal distance of at least 0,4m is to be maintained between the fully
unrolled driven part and any permanent object.
iv. The power supply cable should not be exposed to sunlight or rain directly.
WARNING: Important safety instructions.:
• Follow all instructions, since incorrect installation can lead to severe injury.
• Do not allow children to play with fixed controls.
• Keeps remote controls away from children.
• Frequently examine the installation for imbalance and sings of wear or damage to cables and springs.
• Do not use if repair or adjustment is necessary.
• Moving parts of the drive must be installed higher than 2.5m above the floor or other level that could
provide access to it.
• Before installing the drive, remove any unnecessary cords and disable any equipment not needed for
powered operation.
• Install the actuating member of a manual release at a height less than 1.8 m.
15