Operating Principles - Manusa Visio Manual De Instrucciones

DUSI01EN - v5
3.3– OPERATING MODES AND COMMAND SELECTOR

Operating principles:

SMART selector:
This device is used to change the operating mode and show
the status of the automatic door.
1
LCD screen: shows the operating mode in use, in a
language which can be configured to Spanish, Catalan,
French and English.
It can be configured to show the actual time and number of
opening cycles in a day.
If the self-monitoring system detects a malfunction, a
message and numeric code is shown on the display to
identify the type of malfunction.
2/4
Menu navigation buttons.
3
Button to confirm selection.
Open OP
Close CL
Reduction opening A1-A4
AUTOMATIC DOOR WITH VISIO OPERATOR - USER MANUAL
Automatic AU
Exit Only EO
OPTIMA selector:
The device is used to change the operating mode and show
the status of the automatic door.
1
2-digit / 7 segments display. Shows the operating mode in
use in a language which can be configured to Spanish,
French, English, German, Italian, Portuguese, Dutch,
Catalan.
If the self-monitoring system detects a malfunction, an inter-
mitent numeric code is shown on the display to identify the
type of malfunction.
2/3
Buttons to Access the Technical Service functions
(reserved for authorized service technicians only)
4
Buttons to select the operating mode.
5
Infra-red receiver, included as standard, to control the door
from a remote control (optional)
17