Prior to use
Controls and Functions
1
Setting menu
®
(ScreenManager
1
)
*
2
3 4
1
Remote control
2
Remote control detector
3
Sensor
4
Input Signal Selection Switch
2
(
) *
5
Slide bar *
2
6
Menu switch (
7
Power switch (
)
8
Power indicator
9
Security lock slot
10
Audio output terminal
11
Input signal connectors
(HDMI 1/2)
12
Input signal connector (PC 1)
13
Input signal connector (PC 2)
14
USB ports (Up)
15
Headphone jack
16
USB ports (Down)
17
ArcSwing 2 Stand
18
Cable holder
ScreenManager
is an EIZO's nickname of the Setting menu.
1
®
*
For how to use ScreenManager, refer to the User's Manual on the CD-ROM.
(In this manual, the setting/adjustment item names in the Setting menu are put in angle brackets < >. (ex. : <Color>))
When touching while the power turns off, the monitor turns on.
2
*
6
Installation
5
6 7 8
Use to set and adjust the monitor. (For the details, please read "Remote
Control Guide".)
Receives the signal from the remote control.
Detects the environmental brightness. BrightRegulator function (see page
14).
• Switches the signal input displayed on the monitor.
• When touching the switch for approx. seconds, a video display appears in
the PC display. When touching the switch again for approx. seconds, the
video display disappears and only PC display remains (single display).
PinP display function (Refer to "Remote Control Guide").
• Uses when the setting/adjustment is performed on each menu.
• When touching it while the menu is not displayed, the shortcut menu is
displayed. By touching the slide bar for 5 seconds, the content of the menu
changes (see page 7).
) *
2
Displays/Quits the Setting menu.
Turns the power on or off.
Indicates monitor's operation status.
Blue
: The screen is displayed Orange : Power saving
Off
: Power off
Complies with Kensington's MicroSaver security system.
[Stereo mini jack] Connects the built-in amplifier speakers, etc.
[HDMI connector × ] Connects AV equipment.
[DVI-D connector] Connects a PC.
[D-Sub mini 15-pin connector] Connects a PC.
[Upstream × ] Connects a PC.
[Stereo mini jack] Connects headphones.
[Downstream × ] Connects a peripheral USB device.
Used to adjust the height and angle of the monitor screen.
Covers the monitor cables.
Setting/Adjustment
17
9
10
11
12
Power connector
Troubleshooting
15
16
Cabling
18
14
13