Connecting Cables - Eizo FlexScan HD2442W Manual Del Usuario

Prior to use

Connecting Cables

1
Check that the monitor is powered off.
2
Connect a PC.
Attention
• When replacing the current monitor with an HD44W monitor, be sure to change the PC settings
for resolution and vertical frequency to those which are available for the HD44W monitor referring
to the resolution table (see page ) before connecting the PC.
1. Check that the PC is powered off.
2. Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on the
PC
DVI connector
Windows Macintosh
D-Sub mini 15-pin
connector
Windows Macintosh
8
Installation Setting/Adjustment
Signal cable FD-C39 (supplied)
Digital connection
Signal cable MD-C87 (supplied)
Analog connection
Troubleshooting
Connectors on the
monitor
DVI-D connector
D-Sub mini 15-pin
connector