Ap602 Screen - CESVA FP122 Manual Del Usuario

3.6 AP602 screen

The AP602 has a 3.2" backlit screen, divided in 4 areas. Below you can find the
information that appears in each one.
INDICATORS AREA
EQUALIZER AREA
VOLUME AREA
STATE AREA
INDICATORS AREA:
This area shows the following indicators:
INDICATION DESCRIPTION
FAN: This indication appears when the fan is on.
PROT: Appears when an internal protection is active: Temperature, overload, etc. It may
also appear momentarily when switching on the equipment.
CLIP: Appears when exceeding the maximum peak voltage or current at the amplifier
output and the AP602 applies the clipping limitation. It can momentarily appear when
switching on the equipment, during its stabilization.
INTERMITTENT OPERATION: Appears when the noise emission works in intermittent
operation mode.
EQUALIZER AREA:
This area shows the following information:

The equalization curve and the selected filter

The equalization adjustment value in dB for the selected filter

The central frequency of the selected filter
VOLUME AREA:
This area shows the following information:

The numerical value of the reproduction volume [MIN -70 to 0 dB MAX]

Bar graphic of the volume
Chapter 3 General description
47