Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Note: Turn the extractor hood on when you start
cooking and switch it off again a few minutes after
you have finished cooking. This is the most effective
way to eliminate cooking vapor.
Operating the appliance
Control panel
Explanation
#
Fan On/off
1
Fan speed 1
2
Fan speed 2
3
Fan speed 3
Ž
Intensive setting
ž
Run-on funcion
œ
Saturation display
c
Light on/off
Turn on the fan
Switching on
For extraction there are three ventilator speeds and
an Intensive setting available.
ÿ
1
Press the
button to switch on the appliance.
The fan starts in setting 2.
2
With the buttons 1, 2, 3 or
according to the cooking situation.
Switching off
ÿ
Use the
button to switch the appliance off.
Intense level
For especially strong odor or vapor, use the intense
level.
ÿ
1
Press the
button to switch on the appliance.
The fan starts in setting 2.
Ž
2
Press the
button to switch on the Intensive
setting.
Note: If the button was pressed while the fan is
running on speed 1, 2 or 3, the electronics
automatically switch back to the previously-
selected fan speed after 5 minutes.
Ž
, set the fan speed
3
To switch off the Intensive setting earlier, press
ÿ
the
button or the button for another fan
speed.
Setting the duration
You can set the duration after which the Intensive
setting switches off automatically.
Duration
Press buttons simultaneously
Ž
3 minutes
and 1
Ž
5 minutes
and 2
Ž
10 minutes
and 3
The factory setting is set to 5 minutes.
Run-on function
The run-on function can be set for any fan speed.
1
First press the button for the desired fan speed
Ž
1, 2, 3 or
and then press the
Notes
‒ The run-on time is ten minutes for all fan
speed settings. Once this time has elapsed,
ventilation switches off automatically.
‒ If the lighting is switched on, it remains on.
2
To switch off the run-on function earlier, press
ÿ
the
button.
Interval ventilation
For interval ventilation, the device is switched on
automatically for five minutes per hour.
ÿ
1
Press the
button to switch on the appliance.
The fan starts at level 2. The interval ventilation
can be used on level 1, 2 or 3.
2
Press the run-on button
Note: This mode is indicated by alternating
ž
lighting up of the
corresponding speed.
3
To end interval ventilation, press the
Lighting
The lighting can be switched on and off
independently of the ventilation.
@
Press the
button.
Setting the brightness
@
Press and hold the
button until the desired
brightness is reached.
ž
button.
ž
twice.
button with the
ÿ
button.
9
Publicidad
Capítulos
Tabla de contenido
