Before Connecting The Appliance; Security Measures - Mx Onda MX-PIP2195 Manual De Instrucciones

Placa de inducción portátil
Ocultar thumbs Ver también para MX-PIP2195:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1

BEFORE CONNECTING THE APPLIANCE

Read these instructions and save them for later use carefully.
Check that the voltage of your outlet is 230V.
The power cord is relatively short, to prevent accidents caused
by tripping or entanglement.
If you need to use an extension cord, use only an extension
cord that is in good condition and is suitable for the power of
the appliance.
Do not leave the power cord below the plate, which comes into
contact with hot surfaces as you risk damaging the insulating
sheath of the cable network.
To protect against risk of electric shock and personal injury, do
not insert the cable, plug or plate in water or any other liquid.
After removing the packaging, check that the appliance is not
damaged. If in doubt do not use it and contact the technical
support staff.
Keep out of reach of children packaging materials (bags,
polystyrene parts, etc.), as they are a potential source of
danger.
Place the plate at least 30 cm from the walls of other
appliances, furniture or anything that could be damaged by
heat.
The manufacturer declines any liability for damages resulting
from improper, incorrect or careless use of the appliance.

SECURITY MEASURES

Children should not play with this device.
Cleaning and maintenance by the user can not be done by
children unless they are older than 8 years and are
supervised.
Failure to follow these safety warnings could result as a result
burns or serious injury.
This device can not be used by children (under the age of 8
years) or persons with or without experience and knowledge
reduced physical, sensory or mental capabilities, unless they
3

Publicidad

Tabla de contenido
loading

Tabla de contenido