Technical Specifications - Johnson Controls M9206-B-1S Serie Manual Del Usuario

Actuador eléctrico activado/desactivado
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Technical Specifications

Product
Power Requirements
Input Signal
Auxiliary Switch Rating
Spring Return
Mechanical Output
Rotation Range
Rotation Time
Cycles
Audible Noise Rating
Electrical Connections
Mechanical Connection
Enclosure
Ambient Conditions
Dimensions (H x W x D)
Shipping Weight
Agency Compliance
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423
Milwaukee, WI 53201
M9206-Bxx-1S Series On/Off Electric Spring Return Actuators
Typically:
BDx:
Nominal 230 V 50 Hz 0.048 A (11.0 VA) running; 0.040 A (9.2 VA) holding position
BGx:
Nominal 9.8 VA running; 5.8 VA holding position
BDx:
207 to 253 VAC at 50 Hz
BGx:
20 to 30 VAC at 50/60 Hz SELV
BxB Models: One Single-Pole, Double-Throw double-insulated switch
Rating:
24 VAC: 50 VA pilot duty
120 VAC: 5.8 A resistive, 1/4 hp, 275 VA pilot duty
240 VAC, 5.0 A resistive, 1/4 hp, 275 VA pilot duty
Direction is selectable with the mounting position of the actuator:
CCW actuator face is away from the damper for CCW spring return;
CW actuator face is away from the damper for CW spring return.
Running Torque: 6 N·m (53 lb·in)
Adjustable from 34.5 to 90° CW or CCW; mechanically limited to 93°
Powered (On): 0 to 6 N·m (0 to 53 lb·in) load at all operating conditions:
M9206-BGx: 10-40 seconds
M9206-BDx: 10-65 seconds
Powered (On): 50% load at nominal conditions:
M9206-BGx: 25 seconds
M9206-BDx: 21 seconds
Unpowered (Off): Spring return time is 35 seconds nominal, 70 seconds maximum
60,000 full stroke cycles; rated at 6 N·m (53 lb·in)
55 dBA nominal at 1 m
Actuator:
1.2 m (48 in.) cable with 0.75 mm
Auxiliary Switch:
1.2 m (48 in.) cable with 0.75 mm
10 to 16 mm (3/8 to 5/8 in.) diameter round shaft or 10 to 14 mm (3/8 to 9/16 in.) square
shaft
NEMA 2, IP42
Operating:
BDx
-32 to 50°C (-25 to 122°F); 10 to 90% RH, noncondensing
BGx
-32 to 60°C (-25 to 140°F); 10 to 90% RH, noncondensing
Storage:-40 to 86°C (-40 to 186°F); 5 to 95% RH, noncondensing
All Models:
202.3 x 82.6 x 76 mm (7.96 x 3.25 x 2.99 in.) with cable gland
1.56 kg (3.45 lb)
BDx:
CE Mark, EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC
ACN: 002 968 103
BGA:
CE Mark, EMC Directive 89/336/EEC
ACN: 002 968 103
BGB:
CE Mark, EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC
ACN: 002 968 103
M9206-Bxx-1S Series On/Off Electric Spring Return Actuators Installation Instructions
2
(18 AWG wire leads)
2
(18 AWG wire leads)
www.johnsoncontrols.com
Printed in U.S.A
5

Publicidad

Tabla de contenido
loading

Tabla de contenido