CAUTION:
Should you wish to remove the film from your camera before it is finished (either
because you want your photos quickly or because you think the film is jammed)
please note the following information:
1. Do not open the back of the camera when a film is loaded. Any attempt to pull
the film out yourself may have the following results:
A. You will expose the film to light & ruin your photos.
B. You could damage the camera's precision made film gears.
2. To remove the film push the "Film Rewind Switch". This will activate the
motor, which will stop when the film is completely rewound.
3. Should step 2 prove unsuccessful, change the batteries for a new set &
repeat step 2.
4. If step 3 proves unsuccessful, immediately return your camera to the dealer.
Please note: Most apparent problems are caused by either misloading the film or
by low battery power. Please carefully read the user manual to avoid these
things.
—131—