Honda CBF500/A Manual Del Propietário página 38

3. Loosen the lock nut (5) at the lower end of the
cable. Turn the adjusting nut (4) to obtain the
specified free play. Tighten the lock nut (5)
and check the adjustment.
4. Start the engine, pull in the clutch lever and
shift into gear. Make sure the engine does not
stall and the motorcycle does not creep.
Gradually release the clutch lever and open
the throttle. The motorcycle should begin to
move smoothly and accelerate gradually.
If proper adjustment cannot be obtained or
the clutch does not work correctly, see your
Honda dealer.
24
Other Checks:
Check the clutch cable for kinks or signs of wear
that could cause sticking or failure. Lubricate the
clutch cable with a commercially available cable
lubricant to prevent premature wear and
corrosion.
(5)
(4) Adjusting nut
(5) Lock nut
(4)
(A)
(B)
(A) Increase free play
(B) Decrease free play