Installation - ITALFARAD PFC96evo Manual De Instrucciones

 PFC96evo regulator is designed for flush-mount installation. With proper mounting, it
guarantees IP54 front protection.
 From inside the panel, for each four of the fixing clips, position the clip in one of the two
sliding guide, then press on the clip corner until the second guide snaps in.
 Push the clip forward pressing on its side and making it slide on the guides until it presses
completely on the internal surface of the panel.
 For the electrical connection see the wiring diagrams in the dedicated chapter and the
requirements reported in the technical characteristics table.
Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com

Installation

ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy
E
N
59