Recording; Recording On A Tape - JVC UX-H100 Manual De Instrucciones

Recording

IMPORTANT:
• It may be unlawful to record or playback copyright
material without the consent of the copyright owner.
• The recording level is automatically set correctly, so it is
not affected by the other sound settings. Thus, during
recording you can adjust the sound you are actually
listening to without affecting the recording level.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
• You can only use type I tape for recording.
• DO NOT turn off the unit while playing back or
recording a tape. The cassette deck or tapes
may be damaged.
• DO NOT use type II and type IV tapes since the
unit is not compatible with such tapes.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
At the start and end of cassette tapes
There is leader tape which cannot be recorded onto. Thus, when
recording from discs, FM/AM broadcasts, or external equipment,
wind the leader tape first to ensure that the recording will be made
without losing any music.
To protect your recordings
Cassettes have two small tabs on the back to protect against
unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
17

Recording on a Tape

On the unit ONLY:
1
2
3
4
• If no cassette is inserted.
• If a protected tape is inserted.
To stop recording for a moment, press *.
To resume recording, press * again.
To stop recording, press &/).
To remove the cassette, press &/) while
recording is stopped.
Adhesive tape
Put a recordable cassette in with the exposed
part of the tape down.
• See also page 15.
Close the cassette holder gently.
Start playing the source—FM, AM, or
auxiliary equipment connected to AUX jack.
• When the source is FM or AM, tune in to the station
you want to record.
• When recording from discs, see "Recording Discs—
Disc Synchronized Recording" on page 18.
Press ‡ (recording).
‡ and # lock down, and the recording starts.
• REC indicator is shown on the display
during recording.
You cannot press ‡ (recording) in the following cases: