Changing The Distance Display Unit (M/Yd) (F1); Changing The Measurement Display Mode (F2) - Nikon MONARCH 7i VR Manual De Instrucciones

■ Changing the distance display unit (m/YD) (F1)

En
Es
Factory default setting is yard (YD).
Fr 1. From standby, a long press (1.5 seconds or more) of the MODE button displays
the setting menu of the distance display unit (F1).
Pt
2. Short press (less than 1.5 seconds) of the PWR button switches units of meter
and yard.
3. After setting, a short press (less than 1.5 seconds) of the MODE button
displays the setting menu of the measurement display mode (F2).
When setting is completed, a long press (1.5 seconds or more) of the MODE
button or unoperated more than 8 seconds returns you to standby.
14

■ Changing the measurement display mode (F2)

Horizontal distance mode and actual distance mode can be switched.
Factory default setting is horizontal distance mode.
1. From standby, a long press (1.5 seconds or more) of the MODE button, then a short
press (less than 1.5 seconds) of the MODE button displays the setting menu of the
measurement display mode (F2).
2. Short press (less than 1.5 seconds) of the PWR button switches the measurement
display mode.
3. After setting, a short press (less than 1.5 seconds) of the MODE button displays the
setting menu for target priority mode (F3).
When setting is completed, a long press (1.5 seconds or more) of the MODE button
or unoperated more than 8 seconds returns you to standby.
Displayed item differs according to the setting mode.
Horizontal distance mode
Horizontal
distance
En
Es
Fr
Pt
Actual distance mode
N/A
Actual
N/A
distance
15