Publicidad
Idiomas disponibles
Idiomas disponibles
■ Changing the target priority mode (F3)
En
Es
This Nikon Laser Rangefinder employs the First Target Priority/Distant Target
Priority switching system.
Fr
Factory default setting is Distant Target Priority mode.
Pt
1. From standby, a long press (1.5 seconds or more) of the MODE button, then
a short press (less than 1.5 seconds) of the MODE button twice displays the
setting menu of the target priority mode (F3).
2. Short press (less than 1.5 seconds) of the PWR button switches the target
priority mode.
3. After setting, a long press (1.5 seconds or more) of the MODE button or
unoperated more than 8 seconds returns you to standby.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects:
First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.
16
[Measurement]
Caution — Controls, adjustments or usage of procedures other than those specified herein may
produce negative effects or damage to your health due to laser radiation.
*Before measuring, be sure to confirm each mode setting.
* Please refer to each section on how to set each mode.
■ Adjusting diopter
Adjust the diopter to obtain a clear internal display in the viewfinder.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete stop.
Next, turn on the power and rotate the diopter adjustment ring back and forth until the internal display
comes into focus.
■ Measuring
1. Turn on the power.
(Automatic power shut-off after approx. 8 seconds
unoperated.)
Immediately after power-on
Standby
3. Pressing the PWR button starts measurement.
After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.
If you press the PWR button during power-on, another measurement starts.
En
Es
Fr
Pt
2. Aim at the target.
Position the target at the center of the
target mark.
17
Publicidad
Capítulos
Solución de problemas
