Getting Started; Charging The Battery - JVC GR-DV1 Manual De Instrucciones

10

Charging The Battery

You can charge one battery pack at a time, or two consecutively.
ATTACH
CHARGE INDICATOR 1
CHARGE INDICATOR 2
POWER CORD
Charge Marker
The charge marker makes it easy for you to differentiate between charged and discharged batteries. Choose
RED or BLACK to mean charged or discharged, and you'll always know the status of your batteries.
1
SUPPLY POWER TO CHARGER
Connect the power cord between the AC
Power Adapter/Charger and an AC outlet. The
power indicator comes on.
2 ATTACH BATTERY/BATTERIES
Remove the battery pack's protective cap and
make sure the + – marks are facing down and
aligned with the corresponding marks on the
AC Power Adapter/Charger.
• The Charge Indicator begins blinking to
indicate charging has started.
• To charge two batteries consecutively, attach
one right after the other. If you attach a
second battery while the first one is being
charged, the time required for charging will
increase.
BATTERY PACK BN-V712U
DC JACK
POWER LAMP

GETTING STARTED

DETACH
RED
BLACK
CHARGE MARKER
• The charge marker does not move
by itself. After charging or removing
a discharged battery, be sure to set
the marker to the predetermined
position.
3
CONFIRM STATUS
When the charge indicator stops blinking but stays
on, charging is finished. (If two batteries are attached,
this means that they've both been charged.)
CHARGING TIME
BATTERY ONE
BN-V712U approx. 140 min.
4 DETACH BATTERY/BATTERIES
Slide the battery or batteries in the direction of
the arrow and lift off.
•Remember to unplug the power cord from
the AC Power Adapter/Charger.
TWO
approx. 210 min.