JVC GR-DV1 Manual De Instrucciones página 56

56
STOP BUTTON
EDIT BUTTON
FADE/WIPE BUTTON
EDIT IN/OUT BUTTON
9 PREPARE SOURCE TAPE
Rewind the tape in the camcorder to the
beginning of the scene you want to edit and
press PAUSE.
10 ENGAGE VCR'S RECORD-PAUSE
MODE
Point the remote control toward the VCR's
infrared sensor and press VCR RECORD/
STANDBY, or manually engage the VCR's
Record-Pause mode.
11 START EDITING
Press EDIT on the Docking Station. Editing
proceeds as programmed, right through to the
end of the last registered scene.
• If you selected a Fade/Wipe effect, it is active
between selected scenes during dubbing.
• If you selected a P.AE/Effect, it is active
during scenes while dubbing.
• When dubbing is complete, the camcorder
enters the PAUSE mode, and the recorder
enters its RECORD/STANDBY mode.
• If you don't register an Edit-Out point, the
tape will be dubbed all the way to the end
automatically.
REW BUTTON
T W
EFFECT BUTTON
EDITING (Cont.)
I N OUT
1 00 : 25 ~02 : 05
W
H
2 07 : 18~ 08 : 31
P
3 03 : 33 ~05 : 53
OFF
4 09 : 30 ~13 : 15
5 15 : 55 ~
6 ~
7 ~
8 ~
T I ME CODE 015 : 55
TOT AL 009 : 02
R.A.EDIT PROGRAM SCREEN
RM-V708U
(provided)
VCR RECORD/
STANDBY BUTTON
12 STOP EDITING
Engage the STOP modes for the camcorder and
the recorder.
NOTES:
During dubbing, make sure the remote control is
pointed at the recorder's sensor, and that the path
between the two is unobstructed.
If, during dubbing, you press a button on the
camcorder, its RECORD/STANDBY mode is
automatically engaged.
P
OFF
B/W
: