Description Of The Icons - Angelcare AC 420 Manual Del Propietário

ICON MEANING
PARENTS UNIT
Power
Channel key (8 channels)
Temporary mute key
Up and down
sound volume
PARENTS UNIT'S SCREEN DISPLAY
Sound level indicator
Channel and Baby's room
temperature display
Battery level
Nursery unit
Parents unit
Sound
In Range icon
ICONS ON YOUR ANGELCARE
Press and hold to turn ON or OFF.
Press to enter or exit the Channel Selection Mode.
Push the channel button on the parents unit. The "--" symbol will appear along
with the In Range icon which will flash. Press the channel selector (top button)
on the nursery unit until the night light halo flashes. Select the channel by
gently pushing on the top button on the nursery unit (you will see the channel
changing on the parents unit). Once the channel is selected, press and hold the
nursery unit top button to confirm selection (halo will stop flashing).
Both units are always on the same channel.
If the interference persists, consult the Troubleshooting section.
Press to mute the speaker. parents unit will not receive sound for 2 minutes.
Press again to reactivate the sound before the 2 minutes are up, if desired.
Increases or decreases volume on the parents unit
Displays the sound level on the parents unit. There are 5 sound levels. Once
you've chosen the desired level with the Up and Down keys, the bars will disap-
pear and will start moving according to the sound transmitted by the nursery unit.
The sound level indicator bars allow you to see the level of sound in your baby's
room. The louder the sounds from baby, the more bars appear.
When turning ON the parents unit then the nursery unit, the channel number
will be displayed on the parents unit screen for about one minute. It will then
be replaced by the nursery room temperature display (in Celsius).
Note: If the nursery unit is ON before the parents unit, or if the Parent Unit is OFF
and then turned ON while nursery unit is ON, the temperature display will
indicate the channel number until there is a change of temperature.
When this icon is clear, the batteries in the parents unit are low, and the parents
unit needs to be placed on the charger. When icon is clear and flashes, and the
nursery unit icon appears, the nursery unit batteries needs to be replaced. When
the batteries are TOO LOW, a "beep" will be heard every 15 seconds . The low
battery warning will continue for 30 minutes before the unit shuts itself OFF.
When this icon appear, batteries need to be replaced in the nursery unit.
This icon will be ON only during Channel Selection Mode.
This icon indicates that the sound transmission is activated. It will flash when
in Temporary Mute Mode.
1) This icon will start flashing on the parents unit when the distance between the
units is over the maximum range. A beep will also be heard. To activate this
function, slide the right wing switch up. This option informs you when the dis-
tance between the nursery unit and the parents unit is over the maximum range
of transmission. To deactivate the In Range function, slide the right wing down.
NOTE: Range: up to 250 meters/ 820 ft (open field); between 80 meters/ 262 ft and
100 meters/328 ft (indoors).
2) This icon will also flash with the channel number on the parents unit screen
when in channel selection mode.
® MONITOR
FUNCTION AND USE
5
N