SIBELSOUND
4. CLEANING AND MAINTENANCE
4.1. CLEANING
Do not use abrasive substances or solvents. The device and accessories can be damaged.
Clean the unit and its accessories with a wet, soft cloth, with water and a mild soap, or with isopropyl alcohol. Then, dry all the
parts thoroughly. Ensure that no liquid or foreign body enters the unit, connectors or connections. Exercise caution not to scratch
the screen.
The air-conduction headphone pads can be removed for thorough cleaning. Dry them with a cloth before replacing.
4.2. PREVENTATIVE MAINTENANCE
Preventative maintenance consists of all those actions that keep the equipment in good working order. It is recommended to do
the following every week:
•
Verify that all connections, accessories and other external elements are in perfect condition, without cracks or external damage.
•
Check that all accessories are properly connected to the unit's back panel.
•
Check the correct calibration of the unit. If a calibration warning appears when starting the unit, contact your supplier or
SIBEL S.A.U.
Technical Department.
Some unit basic checks can be performed accessing the MAINTENANCE (
instructions.
If some anomaly or unusual unit behavior is detected, contact your supplier or
4.3. CORRECTIVE MAINTENANCE
The corrective maintenance consists of repairing and restoring the use of the equipment, when poor operation or improper use
may have affected its functionality.
If some fault is detected, which prevents the correct operation of the unit, contact your technical support service or
Technical Department, indicating the type of anomaly encountered. The technical documentation necessary to perform the unit's
corrective maintenance is available for the technical support services or for technical staff authorized by
520-800-MUM · Rev 1.01
DUO
· User's manual
) -> UNIT TEST
menu and following the on-screen
SIBEL S.A.U.
Technical Department.
EN 30
SIBEL, S.A.U.
SIBEL S.A.U.