Automatic Flash Mode - Metz 64 AF-1 digital Manual De Instrucciones

The faster the shutter speed, the lower the
guide number!
The setting for automatic high-speed syn-
chronisation occurs on the camera (see
camera operating instructions)!
The display of the flash unit then in addition
TTL FP
shows "FP" ( ).

7.5 Automatic flash mode

A
In the automatic flash mode
unit sensor measures the light that
reflects back from the subject. The sensor
has a coverage of about 25°, and only mea-
sures the light for the time a flash is fired by
the mecablitz.
The flash is cut off as soon as sufficient light
has been emitted for correct exposure. The
sensor of the mecablitz has to be directed
at the subject.
M
9:0 m
, the flash
M-
35 m
Zoom
m
P
1/1
MODE
TTL
A
M
q
A
0.8 - 9.0 m
M-
m
35
Zoom
m
EV
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last .
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
5,6
F
selecting the mode of operation to appear.
O
• Press the
touch display and select
A
• Press the sensor button on the touch
display.
p
• Set a suitable mode of operation on the
A
camera, e.g. .
5,6
F
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
sensor buttons on the
A
.
k
161