Power Button; Control Panel/Button Operation - branatech PAC12-12-276 Manual Del Usuario

CONTROL PANEL / BUTTON OPERATION
Buttons

POWER BUTTON

Plug in the power, the machine enters the standby state, and press the power button, the power light is on,
the buzzer sounds 1 sound, while the wind blade is turned on, when the machine powers is on and defaults
to the automatic mode, the automatic indication light is on. According to the current indoor temperature, the
machine selects cooling, heating, or air supply mode.
In the running state, after pressing the power button, the power light turns out, the compressor stops work-
ing and all the lights are off. And the fan will stop after 10 seconds, when the fan is off, the fan blades are
closed and the machine enters the standby state.
FAN SPEED BUTTON
This button is to adjust the wind speed button, but in the dehumidification, sleep mode, you can not adjust
the wind speed.
In the Ventilation mode of cooling, heating, ventilation and automatic mode, you can adjust the wind speed.
Press the wind speed button, the light switch instantly, but the wind speed delay 2S to switch. (Long press the
wind speed key 3S to open the child lock function, all button locked, child lock button light. Long press the
wind speed button 3S again, and remove the child lock function, then unlock all functional button, the child
lock light turns out.)
21