Accessories & Installation; Accesories & Instalation - branatech PAC12-12-276 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Filter maintenance
First stop the machine and then open the filter.
Cleaning the filter can use neutral detergent, washing in warm water. After cleaning, dry in
a dry and cool place, and then re-installed back to the machine.
If you use this air conditioner in a dusty environment, the filter should be cleaned in time,
otherwise it will cause the air inlet to block and affect the machine performance.
Maintenance after use
If the machine is not used for a long time, please pull out the rubber stopper at the drain
and clean the residual moisture inside the machine.
In clear weather, keep the machine running in ventilation mode for 4 to 6 hours to dry the
inside of the machine and prevent mold.
Stop the machine, unplug the power plug, and then remove the remote control battery,
and keep the machine safe.
Clean the filter and reinstall it.
Remove the air duct and store it properly and close the hole.
1. Exhaust pipe
2. Exhaust pipe fitting
3. Exhaust pipe baffle connector
4. Remote control
5. Adjustable baffle
6. Drain pipe
25
ACCESSORIES & INSTALLATION

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido