Mode Button - branatech PAC12-12-276 Manual Del Usuario

MODE BUTTON

The first time the machine is powered on, the default is automatic mode.
Press this button to switch between cooling mode, heating mode, automatic mode, dehumidi-
fication mode and ventilation mode. Pressing the button every time, the buzzer will beep once.
In the auto mode, the cycle will be switched, the indicator light will be activated, and the mode
will be switched after 5s delay.
ADD BUTTON
1. The original set temperature is immediately displayed when pressed this button, and the
temperature value flashes. Each time the buzzer sounds, the temperature is set to "plus one".
After stopping the operation, the temperature set value flashes 5S to confirm the set value and
return to the current temperature value. The digital display order when pressing the button is
as follows:
16→17→18→19→20→21→22→23→24→25→26→27→28→29→30→31→32
2. After pressing the timer button to enter the timer setting state, each time the buzzer
sounds, set the timing "plus one": 0→1→2
MINUS BUTTON
1. The original set temperature is immediately displayed when pressed, and the temperature
value flashes. Each time the buzzer sounds, the temperature is set to "minus one". After stop-
ping the operation, the temperature set value flashes 5S to confirm the set value and return to
the current temperature value. The digital display order when pressing the key is as follows:
32→31→30→29→28→27→26→25→24→23→22→21→20→19→18→17→16
2. After pressing the timer button to enter the timer setting status, each time the buzzer
sounds, set the timer "minus one": 24→23
TIMER BUTTON
Bidirectional timing: when machine running , press button, set time of power off; When the
machine is standby, press button, set the boot time; press button then press add or decrease
to add or decrease 1 hour; Timing adjustable range is 1~24 hours, set to 0, then cancel the
timing.
... ...
→→23→24→0→1
... ... ... ...
→1→0→24→23
... ...
Cycling in this way .
Cycling in this way.
22