Dentsply Sirona Cercon xt ML Instrucciones De Uso página 8

Nesting
Please consider the 4 different layers for an optimal nesting:
Disc Height
Incisal
Transition Layer 2
Transition Layer 1
Dentin
Positioning as an example in an 18 mm disc, unsintered.
Incisal
Transition Layer 2
Transition Layer 1
Dentin
Entering the shrinkage factor for the milling unit:
In CAM software allowing the entry of 3 dimensions, enter X, Y and Z values
In CAM software allowing the entry of 2 dimensions, enter X or Y and Z values
In CAM software allowing the entry of 1 dimension, enter the X value
4
14 mm 100 % 18 mm
3.6 mm 25.70 % 3.6 mm
1.8 mm 12.85 % 1.8 mm
1.8 mm 12.85 % 1.8 mm
6.8 mm 48.60 % 10.8 mm
100 % 25 mm 100 %
20 % 3.6 mm 14.40 %
10 % 1.8 mm 7.20 %
10 % 1.8 mm 7.20 %
60 % 17.8 mm 71.20 %
20 %
10 %
10 %
60 %