Current Time; Setting The Clock; Programming The Unit - Krups KM4 Serie Manual De Instrucciones

DahlstromRéf. NC00020545-02_DahlstromRéf. NC0020545-02 11/10/13 09:52 Page11

CURRENT TIME; SETTING THE CLOCK

When the machine is first plugged in, the clock blinks and ask you for setting the clock.
Press the H and Min buttons to set the time. This will ensure the Auto-On function
activates at the proper time of day.

PROGRAMMING THE UNIT

Use the PROG button to access 3 programmable functions. The LCD will display a
different function for each time the PROG is pressed. The blinking display and the
icon alerts you that the unit is in a programming mode. After pressing the PROG button
the screen should default back to the stand-by mode after 5 seconds of inactivity,
accepting the last programmed settings for auto-on and auto-off.
1- Auto-On setting #1:
Press PROG (r) once, the AUTO program #1 is indicated with a red light (o).
Press the H and Min buttons (p) to set a time for the machine to brew automatically.
You can press and hold the buttons to move quickly through the hours or minutes.
If you prefer a 24 hour clock or military time you can switch from
AM/PM mode by pressing the H and min buttons simultaneously.
The AM/PM symbol will disappear when the clock is running in 24
hour mode.
You can press and hold the buttons to move quickly through the
hours or minutes.
English
11