Descargar Imprimir esta página

Garant 23 7502 ER25 Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

All of the assembled tools are shown in basic setting 0.
When fitting the tool, the indexable insert must point in the direction of the positive adjustment direc-
tion (+) of the slider.
DE
DE
From a diameter of 63 filler piece 3 must be fitted for coolant redirection and grub screw D unscrewed
until the circlip stop.
The minimum coolant pressure of 5 bar must be maintained.
The increasing of the coolant pressure to 10–20 bar improves the machining process and should there-
fore be aimed for.
Screw back screw C until the location bore is free.
Insert filling piece 3 with the clamping surface towards the screw.
Clamp filling piece 3 using screw C to 5 Nm.
Fit cartridge H2 or H3 , adjust using graduated scale and fasten to 5 Nm using cheese-head screw 6
(spring disc/plain washer).
EN
Loosen screw A.
Place tool on pre-setting device: adjust finely using graduated dial.
One turn of the graduated dial corresponds to a ⌀ adjustment of 1 mm.
Using the scale, adjustments of 0.01 mm can be made from graduation to graduation or of 2 μm using
the vernier.
Clamp slider B to 6 Nm with screw A.
FR
FR
IT
IT
ES
ES
20

Publicidad

loading

Productos relacionados para Garant 23 7502 ER25

Este manual también es adecuado para:

23 7509 er40